Part 1 :New Boscam 32 channel 5.8GHz kit , first look

Deal Score0
Deal Score0

First look at the new Boscam 5.8 GHz receiver and transmitter set.

Improvements on the design and connectors are place in a sensible manor this time.

there are 32 channel this time and the airwave channel are covers also , it means it can be used with the Fat shark goggles with the built in receiver.

there will be a new RX pod out shortly with Horizon FPV antennas. This will hold the receiver unit and take the stress off the connectors and a proper solid antenna connector . Battery supply and the full two video channels on the output.

See part 2 where we put it out to test in the field.

FPV 5.8GHz 600mW 32CH A/V Transmitting (TX) Module TS832 RP-SMA

– 32 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compatible;
– Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching;
– Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received;
– Power off memory: Replay the very last frequency band and channel
– Independent video and audio signal outputs

– Video format supported: NTSC/PAL
– Antenna connection: RP-SMA, jack (module side, both TX and RX)

TX TS832:
– Power input: 7.4-16V (3S Lipo suggested)
– Transmitting power: 600mW
– Antenna gain: 2db
– Working current: 220mA at 12V
– Video bandwidth: 8M
– Audio bandwidth : 6.5M
– Weight: 22g
– Dimension: 54x 32x 10mm(excluding antenna)

RX RC832:
– Power input: 12V
– Working current: 200mA max
– Antenna impedance: 50Ω
– Antenna gain: 2db
– Rx sensitivity -90dBm
– Video impedance: 75Ω
– Video format: NTSC/PAL auto
– Dimension: 80x 65 x15mm
– Weight: 85g


We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general