HPI JUMPSHOT Monster Truck 1/10

Do you like it ?0

The Jumpshot MT is a brand new, fresh truck design from HPI Racing that takes RC off-road fun to new levels! The Jumpshot MT uses the super-durable and proven TVP (Twin Vertical Plate) design pioneered by the Savage monster truck to give RC fans a strong and reliable platform for blasting and bashing around with your friends! The modular design of the Jumpshot MT means that maintenance is simple and all the electronics and important parts are protected from crashes and the elements. The battery box is also easily accessed from underneath the truck, so changing batteries for more fun driving is extra-easy and fast!

The Jumpshot MT features a radio box that’s protected against the elements, a direct-link steering system with a waterproof steering servo and a strong rear-wheel 2WD drivetrain. A complete set of ball bearings lets you get the most out of every battery pack without losing any power from the brushed motor fitted at the back of the chassis. This means you can blast through any type of terrain you want, whether it’s grass, mud, asphalt, gravel or anything else!A new monster truck from HPI!

Features:

2.4Ghz Radio System
The Jumpshot MT is super-easy to drive and get familiar with – all you have to do is plug in the included battery and switch on the radio and car. It’s that easy! To drive the truck, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the Jumpshot MT, gently push away from you with your left index finger – hold it there to go into reverse. It takes seconds to get used to this easy operation, and in no time at all you’ll be ripping off jaw-dropping, big-air jumps and stunts!

Full adjustability and tuning potential!
The Jumpshot MT drives and performs fantastic right out of the box, however if you want to, it’s easy and quick to adjust plenty of settings, exactly like a real monster truck! Ride height, shock angle and more merely a turn away with your fingers or a wrench if you want to dive under the hood – HPI make it easy to be your own monster truck mechanic AND driver! More complex adjustments such as camber settings can be done with option parts you can get from your RC hobby shop.

Big all-terrain tires for non-stop action!
Huge all-terrain tires are one of the things that makes real monster trucks stand head and shoulders above everything else around them, and the Jumpshot MT does not disappoint! Tackle terrain anywhere with tall, real rubber tires with huge lugs that can handle dirt, grass and loads more! You can also hit the wet stuff, too: the extra-wide tires let you roll over mud, snow as well as over jumps and any obstacles that may get in your way! The tires are wrapped around extra-cool looking chrome wheels that look great whether the Jumpshot MT is sitting on your shelf or kick up mud and rocks as it’s flying across a stream.

Built for extreme fun
The Jumpshot MT is built just like the legendary and award-winning Savage, with a TVP (Twin Vertical Plate) lightweight aluminum chassis that runs from the front to the rear. Sandwiched between the chassis plates are the battery and electronics boxes, plus the steering module and transmission with the suspension mounts. This makes the Jumpshot MT extra-strong and super durable so you can have fun for hours and hours!

Extra-tough Savage-style construction
With durable skid plates front and rear, ribbed battery box door and Savage-style TVP (Twin Vertical Plate) lightweight aluminum chassis, the Jumpshot MT is made to take anything you can throw at it! Tough yet flexible suspension parts flex when the truck hits something hard, and the wheels are made from impact-resistant nylon plastic material so they won’t split or crack under pressure. The Jumpshot MT is made to take a beating!

Real oil-filled shock absorbers
The Jumpshot MT is equipped with long-stroke, oil-filled shocks just like you see on real monster trucks! The outside of each shock absorber is threaded so you can quickly adjust the ride height: lower the truck for on-road action, and raise it for big-air stunts!

Tough gear diff

A strong gear differential helps transfer the power from the rear-mounted motor to the rear wheels, its 4-gear construction allowing you to put the power down for some serious speed and loads of fun as you hit the jumps!

Protected electronics

The Jumpshot MT lets you run in wet conditions because the electronic speed controller and steering servo are fully waterproof, plus the receiver and battery are protected within their special compartments to keep the worst bits of mud and big splashes of water away from them.

Bottom-access battery door
The Jumpshot MT features a hinged battery door underneath the chassis so you don’t need to take the body off to change battery packs. Driving with your friends has never been so easy! The battery door is secured with a metal clip and the full-length ribbing allows it to function as a chassis skidplate.

Specs:
Weight, as tested: 4 lb., 15.9 oz. (2265g)
Material: 2.3mm aluminum
Type: Twin vertical plate

SUSPENSION
Type: Lower H-arm with fixed-length camber link
Inboard camber link positions (F/R): 2/2
Outboard upper arm positions (F/R): 2/2
Shock positions, towers (F/R): 3/2
Shock positions, arms (F/R): 2/2

SHOCKS
Bodies: Plastic, 10mm bore
Shafts: Plated steel, 3mm
Volume compensation: Bladder

DRIVETRAIN
Type: 3-gear enclosed gearbox
Spur gear/pinion: 19/90, 48 pitch
Slipper clutch: Adjustable, dual pad
Differential: Planetary gear
Driveshafts: Steel dogbone
Bearings: Shielded ball

WHEELS and TIRES
Wheels: One-piece plastic, 12mm hex
Tires: HPI Jump T2.8m, rubber multi-terrain tread
Inserts: Closed-cell foam

What do you get?
Factory-built Ready To Run 2WD monster truck
Tough aluminum TVP chassis design
Battery box fits NiMH stick packs and 2S LiPo packs
Battery easily accessible from bottom of chassis
HPI Flux SC-3SWP2 waterproof LiPo-ready ESC
Enclosed receiver box
2.4 GHz radio system
Oil-filled shock absorbers
Double-wishbone suspension design
Sturdy body mounts
Standard 12mm hex hub wheel fitting
Pick-up truck style body with the latest HPI graphics
Large all-terrain tires
Chrome 6-spoke wheels
Battery, wall charger and transmitter AA batteries included

9.9 Total Score
HPI JUMPSHOT Monster Truck 1/10

Powers
10
Quality
10
Durability
10
Price
9.5
PROS
  • Has the super-durable and proven TVP (Twin Vertical Plate)
  • Tought and strong
  • Great quality from HPI
CONS
  • Price could be lower
Add your review

Related Post

We will be happy to hear your thoughts

Leave a reply

Your total score

Register New Account
Reset Password