HeadPlay 7″ 5.8G 32CH FPV Goggles With HDMI & BIG Screen
An ultra wide scope, mind blowing 72 degree field of view will immerse you in FPV in a true mono- screen virtual reality system. The new HeadPlay HD FPV Headset is packed full of features that every FPV enthusiast will enjoy. This headset was designed from the ground up with the FPV pilot in mind, with quality, performance and comfort, through the use of ultra light components and ergonomic design at the forefront of its inception. The headset gently rests on the forehead/cheeks spreading the weight of the set evenly across the head, as compared to many older styled video goggles which rest on the bridge of the nose instead, or worse yet your eye sockets. Three straps securely hold the HeadPlay HD in place while at the same time blocking light coming in from the outside. The end result is a cinematic experience that is sure to impress. An absolutely superior choice over any fixed monitor solution, for those using dual operator systems or whom wish to involve a client as fully as possible. The system incorporates a 7″ 1280p x 800p HD Glossed Immersive Display for the most immersive feeling and clarity. Anti-reflection coating applied to all inner walls gives you the feeling of sitting front row in your own personal cinema. The view has often been compared to an IMAX theatre like experience.
The integrated 5.8GHz hyper sensitive AV receiver designed by RangeVideo gives you the freedom to fly far and low, even with lower powered 5.8GHz AV transmitters. Currently featuring 32 channels (4 Bands), with a 40 channel (5 Bands) FPV racing module available soon.
Take full and immediate advantage of new technologies as they evolve with the Headplay HD’s future-proof mini HDMI Type C port, you can use the Headplay HD with your DJI Inspire, Phantom 3 or Matrice 100, or other HD downlinks (such as the DJI Lightbridge 1 & 2, or Amimon Connex) to see in crystal clear FPV.
The Headplay also features a further external AV input with prototypical SMA type threaded socket for connection to aftermarket 900MHz/1.3GHz/2.4GHz video receivers, as well as a high end XS9JK latched terminal. Connect your external AV receiver or ground control station to the Headplay set with the included 2.5 meter long cable. The Headplay also features a built-in speaker system for you to listen to your favourite tunes while flying, or hear the motors roar and the wind howl as you fly through the sky.
Screen size 7″
Screen resolution: 1280×800
Field of View: 72 degree
Fully adjustable picture via intuitive menus
Control via button panel (distinct button design for “blind” operation)
Rugged design with extremely durable materials
Very high comfort
Different density foam pads allow you to adapt the goggles to your needs.
Weight: 400g (excluding battery)
Easy to clean optics
Current consumption 340mA@12V
Supply voltage: 6-15V Recommended 2S LiPo
Reverse voltage protection
HDMI type C (HDMI-in)
XS9JK (latched high end connector): Power Supply, Video-in, Audio-in, Ground, 5V out
SMA antenna connector
32 channel 5.8GHz A/V receiver
8 segment display
Built-in speaker with volume control on buttons
Band 1: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band 2: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band 3: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band 4: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
- Easy to use
- High quality
- Big screen
- HDMI in