Flip32 Flight Controller With 32-bit STM32 and Naze32 for Multirotors

Do you like it ?0

Flip32 is a small (36x36mm) flight control based on 32-bit STM32 processor running at 72MHz. With current attitude code from MultiWii, CPU spends more than 90% time at idle.

Description:
Size: 36mm x 36mm
Version: 10dof


Features:
3-axis MEMS gyro+accelerometer(MPU6050)
3-axis magenetometer (HMC5883L)
Pressure sensor (MS5611)
Flexible motor output,support various airframe types
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal(Default is Quad-X)
Up to 8 ch RC input-supports standrad receivers(PWM),PPM Sum receiver(FrSky,etc),or Spektrum Stellite receiver
Battery voltage monitoring
Modern 32 processor running at3.3V/72MHz(STM32F103CB)
Onboard MicroUSB for setup and configuration
MultiWii-based configuration software for easy set up
reV4 hardware

Buy button for Banggood

9.6 Total Score
Flip32 Flight Controller With 32-bit STM32 and Naze32 for Multirotors

Powers
9.5
Quality
9.5
Easy to use
9.5
Price
10
PROS
  • Mega cheap
  • Best for begginers
  • Small
CONS
  • no GPs
Add your review  |  Read reviews and comments

Related Post

2 Comments
Show all Highest Rating Lowest Rating Add your review
  1. Reply
    Steve
    2015-08-10 at 22:02

    DO NOT purchase the Flip32+ FC from Banggod. It has a capacitor instead of a resistor on the buzzer so it doesn’t work and the micro-USB connector will break after a few insertions. I have had to return two already to Banggod. The best quality boards I’ve found are at: www.readytoflyquads.com/flight-controllers/flip-series

    • Reply Profile photo of PiratFPV
      PiratFPVNewbie
      Let’s talk about thisWelcome back, cookie for you.Shakespeare
      Exp. 655 pts.
      2015-08-11 at 11:38

      There is new version on banggood which been fixed (I Just heard that opinions) .

Leave a reply

Your total score

Register New Account
Reset Password